2N IP Force 2.0 – RFID reader 125kHz, Seos® Compatible 13.56MHz, NFC ready&OSDP

Internal RFID card reader for installation in 2N IP Force 2.0 intercoms. Allows the use of both 125 kHz and 13.56 MHz frequency cards.
Two additional relays, two logical inputs and an OSDP interface are available. OSDP protocol provides higher security than the Wiegand protocol and encrypts the transmitted data.
It is compatible with the 2N IP Force 2.0 two-button and pictogram models (9151301CRP, 9151302CR). It also includes a tamper switch to signal when the front panel is opened.

SKU 9151325-S

Get a Quote

Technical specifications

Expand all / Collapse all

Dimensions & Codes

Width	112 mm
Height	132 mm
Depth	30 mm
Weight	0.08 kg
HS Code	8517620000
EAN Code	8595159524740

Parameters

Includes	RFID reader, tamper switch, active output, relay, two inputs, OSDP module
OSDP Interface	OSDP reader (software configurable)
Active switch output	9.8 to 13.8 V DC according to power supply (PoE+: 11,6 V; adapter: power supply voltage minus 0,4 V), up to 400 mA
Relay	NO contact max. 30 V / 1 A AC/DC (SSR A, SSR B)
Inputs	2 inputs: active (requires external voltage) or passive (requires external contact only)
Signaling output	Internal red LED under the intercom front panel
Power supply	12 V DC ± 15% / 350 mA for external RFID card reader

Supported cards

125 kHZ	EM4x02, NXP HiTag2, HID® Prox
13.56 MHz: ISO14443A	MIFARE® Classic®, MIFARE Plus®, MIFARE Mini, MIFARE Ultralight®, MIFARE DESFire®
PicoPass	HID® iClass® CSN, Picopass
FeliCa	Standard, Lite
ST SR	SR, SRI, SRIX
HID	HID Seos®, HID iClass SE™, iClass SR, HID MIFARE DESFire with SIO, HID MIFARE Classic with SIO, HID DESFire EV3 SE
2N PICard	supports MIFARE DESFire EV2 & EV3 cards
NFC/HCE	smartphone with the My2N App