Elevator systems
IP solution
A smart elevator means a connected elevator. With our solution, you only need one IoT gateway and two wires in the travelling cable to connect an IP communicator, camera, access reader and advertising panel in the elevator cabin. Improve your elevator!
2N Sentrio
Ensure fully accessible elevator safety with 2N Sentrio, an advanced IP-based emergency communicator with a 7” display.
Show more
2N LiftIP 2.0
Emergency communicator that transmit calls from a elevator cabin to the call centre or control room
Show more
2N Call Center
Call Center for Elevators a software solution for the comprehensive management of emergency elevator communicators.
Show more
2N Elevator Center
Manage and monitor your IP communicators, gateways and routers from your office.
Show moreDigital solution
Are you looking for a modular solution with a wide range of communication interfaces? 2N® Lift8 is the perfect choice for you. You can connect up to eight shafts to the central unit and each shaft can have up to six communication units.
Analogue solution
PSTN lines are nearing their end or are extremely expensive. Connect an analogue communicator to a modern analogue gateway and voice and data (VoIP) communication will take place over a mobile network. You will also be able to keep an eye on the elevator.
2N EasyGate IP+
Modern LTE/VoIP gateway designed to ensure reliable emergency communication between the elevator cabin and the call centre.
Show more
2N Elevator Center
Manage and monitor your IP communicators, gateways and routers from your office.
Show more
2N Call Center
Call Center for Elevators a software solution for the comprehensive management of emergency elevator communicators.
Show moreYour questions, our answers
More than that. 2G, 3G and VoLTE often distort the DTMF signal. Only VoIP technology, using a SIP protocol, guarantees reliable DTMF transmission, something that is essential for the identification of the lift when calling for help. At the same time, it delivers clear audio and saves on charges. Plus, l but not least, IP offers centralised management and monitoring of IP devices in the lift.
If the battery is completely depleted, the lock can be powered externally using a low-power adapter (112047203).
Note: The adapter provides power only – it does not unlock the door. To open the lock, a valid credential must still be presented.
A single gateway with one SIM card offers you reliable emergency communication with the operator. And not just for one lift. With our modular 2N Lift8 solution, the gateway can serve up to 8 shafts. In addition, each shaft can have up to six communicators.
You can make similar savings with our 2N LiftGate IoT gateway. This combines the functions of several devices – an LTE router, switch, converter and backup power supply. It also provides voice and data communication for smart devices in the lift cabin, for the controller and the IP phone in the machine room via a single SIM card.
If the battery is completely depleted, the lock can be powered externally using a low-power adapter (112047203).
Note: The adapter provides power only – it does not unlock the door. To open the lock, a valid credential must still be presented.
Easy, and you don’t even need a UTP cable in the lift shaft. Install a 2N® LiftGate IoT gateway in the machine room, ensuring data connection via a SIM or WAN port. With just two wires in the travelling cable, connect it to the 2N LiftGate Cabin Switch located on the roof of the cabin. Then you can even connect an IP communicator, camera, advertising panel or reader.
Trusted Across Saudi Arabia
From residential developments to corporate headquarters and government facilities, Alsmari Trading solutions are powering communication systems across the Kingdom.