2N® ACCESS UNIT 2.0 FINGERPRINT READER
 
ORDER NUMBER: 916031
Are you looking for access using something which cannot be forget and which the user always has with them? Select fingerprint access, technology which was the sole domain of bank vaults for a long time. We have already installed the 2N® Access Unit 2.0 Fingerprint Reader in family homes, schools and offices. Try offering this unusual method of access for traditional projects
 
Technical Parameters
Interfaces
Power supply:    PoE and/or 12 V/1 A DC
PoE:    802.3af (Class 0–12.95 W)
LAN:    10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling:    Cat-5e or better
Active switch output:    8 to 12 V DC/max 600 mA
Passive switch:    NO/NC contacts, up to 30 V/1 A AC/DC
Inputs:    2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch:    native part of the 2N Access Unit 2.0
Audio:    buzzer (97dBA)
Supported protocols:    DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Fingerprint Reader
Sensor:    optical sensor protected by resistant glass
Reliability:    algorithm for fake fingerprint detection
Resistance:    resistant to water and dust
Signalling:    acoustic and multicoloured LEDs
Sensing area:    large with dimensions of 15.24 x 20.32 mm
Certification:    certified according to FBI standard
Mechanical Properties
Frame:    robust zinc cast frame with surface finish (nickel and black color)
Operating temperature:    -20°C to +55°C
Storage temperature:    -40°C to +70°C
Operating relative humidity:    10%-95% (non-condensing)
Dimensions:    Wall (surface) mounting frame:
- 1 module: 107 (W) x 130 (H) x 28 (D) mm
Flush mounting frame:
- 1 module: 130 (W) x 153 (H) x 5 (D) mm
Flush mounting box (minimum hole):
- 1 module: 108 (W) x 131 (H) x 45 (D) mm
Weight:    max 0.8 kg
Cover rating:    IP54 and IK08