2N® Access Unit M secured 13.56 MHz, NFC ready
 
This version of the 2N® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology. The reader supports NFC technology, so employees who don’t want to wear a card can use their mobile phone to gain access. Administer a unit remotely via the secure web interface or in the 2N® Access
 
Technical Parameters
Interfaces
Power supply:    PoE and/or 12 V/1 A DC
PoE:    802.3af (Class 0–12.95 W)
LAN:    10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling:    Cat-5e or better
Active switch output:    8 to 12 V DC/max 600 mA
Passive switch:    NO/NC contacts, up to 30 V/1 A AC/DC
Inputs:    2 inputs - in passive/active mode (-30 V to +30 V DC)
     OFF = open or Uin> 1.5 V
     ON = short-circuit or Uin< 1.5 V
Tamper switch:    native part of the 2N Access Unit M
Audio:    buzzer, 1 W/8ohm
Supported protocols:    DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies:    13.56 MHz variant
13.56 MHz:    ISO14443A, ISO14443B, NFC support
     reads UID (CSN)
      
Mechanical Properties
Cover:    tempered glass with durable plastic
Operating temperature:    -40°C to +60°C
Storage temperature:    -40°C to +70°C
Operating relative humidity:    10%-95% (non-condensing)
Dimensions (surface mounted):    50 (W) x 133 (H) x 27 (D) mm
Weight:    max 0.5 kg
Cover rating:    IP55 and IK07