2N Access Unit M Touch Keypad & RFID
Great for projects with two-factor authentication. During working hours, employees swipe their RFID cards. Outside these hours, employees must also enter a PIN code. The reader is also great for scenarios when you generate one-off access codes for visitors. The keypad is backlit, so you can install it in dark places. The 2N® Access Unit M Touch Keypad & RFID can read cards with frequencies of 125 kHz and 13.56 MHz.
Interfaces
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail)
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit M
Audio: buzzer, 1 W/8ohm
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies: 13.56 MHz variant (optionally secured)
125 kHz and 13.56 MHz variant (optionally secured 13.56 MHz)
125 kHz: EM4100, EM4102
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Cover: tempered glass with durable plastic
Operating temperature: -40°C to +60°C
Storage temperature: -40°C to +70°C
Operating relative humidity: 10%-95% (non-condensing)
Dimensions (surface mounted): 50 (W) x 133 (H) x 27 (D) mm
Weight: max 0.5 kg
Cover rating: IP55 and IK07
2N Access Unit M Touch Keypad & RFID
Email: sales@alsmaritrading.com I Phone +966114094246
Contact form