The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP. Connect an analogue lift communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal.
2G, 3G and 4G support
Reliable transmission of DTMF
VoIP is the future
 
The gateway supports 2G, 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
 
RELIABLE TRANSMISSION OF DTMF
2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the lift.
 
VOIP IS THE FUTURE
Change all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
 
FOR USE IN ANY LIFT SHAFT
A sturdy cover, operating temperature of up to 85 °C, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any lift shaft.
 
BACKUP OPERATION USING BATTERY POWER
The 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the lift can always call for help and you will be in compliance with the legal standards.
 
CONFIGURATION IN 2 MINUTES
Any technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
 
REMOTE ADMINISTRATION AND MONITORING
With our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the lift communication market.
 
VARIANT WITH A MODEM
Some lift devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
 
Technical Specification
Cellular network
4G LTE bands:    EU (EC21-E): B1/B3/B5/B7/B8/B20
AU (EC21-AU): B2/B4/B5/B7/B8/B28/B40
UMTS/WCDMA bands:    EU (EC21-E): 850/900/2100 MHz
AU (EC21-AU): 850/900/1900/2100 MHz
GSM bands:    EU (EC21-E): EGSM 900 MHz, GSM 1800 MHz
AU (EC21-AU): EGSM 850/900 MHz, GSM 1800/1900 MHz
SIM cards:    2 slots, both support 3 V and 1.8 V SIM cards
VoIP
Protocols:    SIP (RFC3261) over UDP, SIPs, SRTP
DTMF:    a) In-band
Analogy of traditional DTMF, where tones are merged with speech into single voice channel.
b) SIP INFO (RFC 2976)
DTMF signals are sent separately in the SIP message body
Antenna
Connector type:    SMA
Impedance:    50 Ohms
Line interface
Interface type:    FXS with screw terminal blocks
Power source
Power adapter:    (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source
Backup power:    4×AA batteries, constantly monitored
Configuration and upgrade
Local:    web UI over USB
Cloud:    2N® Elevator Center
Other
Dimensions:    195 × 119 × 61 mm
Weight:    600 g
Humidity:    max 90%, non condensing
IP coverage:    IP43
Operating temperature:    -40°C to +85°C
Status LEDs:    power, cellular network, FXS line, data, signal strength
Certifications:    EN 62368-1, EN 81-28, EN 301489-1, EN 301489-7, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311, EN 63000, EN 12016
FCC Part 15b, UL 62368-1, PTCRB
ICES-003 Issue 6, CSA C22.2 No.62368-1
AS/CA S003.1, S003.3, S042.1, S042.4, AS/NZS 62368.1 App ZZ