2N® SIP MicOrder No.: 914431E
 
A SIP based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need of server or distance limitations.
Server-less paging to up to 12 zones
Two-way communication
Pre-recorded announcements
 
Features & Benefits
SERVER-LESS PAGING TO UP TO 12 ZONES
2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
 
TWO-WAY COMMUNICATION
Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
 
PRE-RECORDED ANNOUNCEMENTS
Upload or record a message via the microphone and then play it by simple push of a button to a designated zone.
 
EASY CONFIGURATION
Zones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
 
INTEGRATION WITH AN AXIS SOLUTION
The 2N® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix®, announcements can be made using AXIS cameras or speakers.
 
EASY INSTALLATION WITH A SINGLE CABLE
The 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
 
LISTEN-IN FUNCTION
At simple press of a button one can listen to what is happening in certain zone.
 
SUPPORT FOR IP PBX (SIP)
The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
 
Technical Parameters
Audio parameters
Audio stream:    SIP2.0, RTP multicast, VAPIX®
Audio codecs:    G.711u, G.722, L16
Speakers:    2 build-in, stereo, power output 2x2W, impedance 2x8 Ohm
Interfaces
Logical inputs:    2, galvanically separated, sensitive to contact or voltage from 5 to 48V
Relay output:    1, galvanically isolated, NO and NC contact, max load 48V, 1A
Headphone output:    3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB
Primary microphone input:    symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB
Headset microphone input:    3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB
Line input:    3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB
Power supply
External power supply:    12 to 32V, power draw max. 1A
Power over Ethernet:    PoE to 802.3af standard
Mechanical properties
Dimensions:    209 x 65 x 143mm
Operating temperature:    0°C – 40°C
Buttons and labels
Label dimensions:    39.6mm width x 9mm height
Double button:    28mm x 14mm
Single button:    14mm x 14mm
Smal buttons:    9mm x 9mm